MK1 Mac 1 Annihilator, built off PMI 1 lower tube. In great shape. Paint has normal wear for this style Annihilator. Has Mac 1 Quick Config and nicely cut dropout slot. Has Brass Trigger shoe. Grips are cracked but are neat older Benjamin High Compression Pellet grips. Needs some nice wood grips. Has back adjustable RVA (drilled out of stock back plug). Has Mac 1 bolt with PGPs punched and integrated in (so they won't spring out when the bolt is removed). Has Mac 1 Quickstrip plot. The steel pieces show light rust at the most. The front inside rod of the quick strip slot is dirty with light rust. Other steel pieces look much better. Has pump handle cut for drop out slot. Angled slot for sighting. Awesome all around Annihilator. I wouldn't be selling this Annihilator but I recently purchased another to replace this one. Auto trigger might need to be adjusted but it does seem to AT without air fine. Does need an allen screw in the back of the Mac 1 bolt to retain pump arm but will work fine without one. Has very light residue at breech, probably dried paint from 20 years ago. Total barrel length is 13 inches, total top tube length is 16.75 inches. To be an accurate setup it needs a stock, wood grips and a 12 gram dummer and a ca adapter and you'll be ready to rock.
