Cocking rod

Autocockers use several different lengths of cocking rods depending on the back block style. Here are the Styles and Lengths •Classic Full Block, which usually used a 5 inch total cocking rod length. These are found on Sniper 1s, sniper2s and early autocockers. Slanted block: these use rod with a length a little under 4 inches, typically 3.75 or 3.875 inches (total length). P-Block: I am not sure of the actual length for a p block but depend on the style it could be the same length as a slanted rod / 2k rod or it could be a little shorter. 2k (usually the same as slanted block), typically uses a cocking rod length of a little under 4 inches, typically 3.75 or 3.875 inches (total length). The Autococker cocking rod nut is typically 5.8th inches in length and the bumper is about a 1/16 or 1/8 inch? Not totally sure on the bumper size.
Filter
Set Descending Direction

28 Items

per page
View as Grid List
Filter
Set Descending Direction

28 Items

per page
View as Grid List