PMI nickel piranha long barrel body, project gun (see pics!) Horrible shape! Looks like this might be compatible with a pmi magnum feed neck. If that is the case it might be a good gun to make stock class with a phantom feed neck. End of barrel is in awful shape and should probably be cut down. Will need a heavy hone. Nutsert looks good but will need a thread trace. Came from Gabriel Tyler. Takes a hardline and will need gas through screws. I will trace valve retaining screw threads in body with a tap before sending out. Needs a heavy hone. Has quickstrip notch.Tubes are empty. Feed is heavily notched out and enlarged (both pre and post nickel. End of barrel looks horrible. Needs a long hone to remove excess nickel build up in barrel (front and back) and lower tube
